47638 Media Handler (APL) MDHAPL: An invalid float bar position of <position> mm was specified, range is <min position> to <max position> The float bar was commanded to move to an invalid position, either in preparation for slipsheet removal, when moving to the top of the plate stack or when moving clear of the plate stack. If the target position is less than the minimum, decrease the pallet height parameter for this bay If the target position is greater than the maximum, memove excess plates from the top of the plate stack This error was obsoleted as of version 4.86 An incorrect pallet height Too many plates on the stack Sensor problem position - The position to move the float bar to. min position - The minimum valid position the float bar can be moved to. max position - The maximum valid position the float bar can be moved to. 18-Dec-2007 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:52 2008 PST